|
Version
Number
|
Release
Date
|
Changes included in this version
|
|
3.35
|
5/3/2004
|
Corrected issue of rate strings not being written
to controller after starting GM |
|
3.34
|
5/1/2004
|
Changed Guide Mate to work with Port B of Raven GPS |
|
3.33
|
5/1/2004
|
Changed Light Bar tilt functions
Only Antenna height is entered in GM
Eliminated the level ground calibration
Added Light Bar message screen
Fixed problems in working with IFB3 |
|
3.32
|
5/1/2004
|
Changed to new method of hiding task bar and command
bar between GM pages |
|
3.31
|
4/28/2004
|
Added CR,LF to Baud rate strings for IFB3
Corrected headlands boundary line not being shown in SM
|
|
3.3
|
4/28/2004
|
Fixed the guidance LEDs not working on Light Bar |
|
3.29
|
4/27/2004
|
Change GPS auto detection, based on COM port titles
in Windows
Added manual selection of COM port
Added auto detection of COM port
Changed IFB3 and receiver initialization |
|
3.28
|
|
Corrected issue of following error messages
Cannot call
ifbxSetInterfaceType()
after ifbxOpen() |
|
3.27
|
4/1/2004
|
Change to handle FGP files from SM |
|
3.22
|
3/2/2004
|
Change to pass Light Bar messages out
GPS port of IFB3 box |
|
3.21
|
2/16/2004
|
Fix to run simulation file in a loop
Change to load default language if language is not specified in
ini file |
|
3.2
|
2/6/2004
|
Change language limit from 6 to 10 |
|
3.0
|
2/1/2004
|
Added the following swath patterns: Seeding, Headlands
Contour, Headlands*2 Contour
Add equipment list for system selection
Serial Interface Box: IFB2, IFB3, none
Boom Sense: Manual, Spray Controller
Waypoints: On-screen Buttons, Waypoint Box
GPS: Generic GPS, Raven GPS
On-screen, External, External and On-Screen
Add IFB3 initialization
Add Raven console support
Add waypoint box support
Add zoom function on CDI screen
Add quick view button to jump between SM and GM |
|
2.925
|
11/25/2003
|
Screen fixes for iPAQ 2210 |
|
2.923
|
8/5/2003
|
Fix for NO GPS displayed on Light Bar |
|
2.92
|
7/27/2003
|
Change so that CDI info is not displayed when "Enable
Snap" button is visible
Change so that "NO GPS" is not displayed when closing
boundary |
|
2.919
|
7/17/2003
|
Corrected Generic vs. Raven GPS selection |
|
2.918
|
7/17/2003
|
Added new Headland Contour swath patterns |