News Office Field Order Support Contact Us

Re: Export to a Case Pro 700

Search Discussion Boards
April 03, 2017 06:01PM
If you have never wrote out for the ISO Task controller, these would be the steps to follow:

1. Go to the Jobs tab, where you have displayed in a burnt orange color, the VRA Planned job. Right click and select Workorder/console.

2. Then click the File Menu and select Write Job Data

3. Open the Case IH and highlight the AFS200, Pro300, Pro600, Pro700 option.

4. Click the Resource List button. Select the desired C/F/F names, any Inputs. Then select the Options Tab. Here is where you will check the box for the ISO XML option. Check the boxes for Export Boundaries and Export Prescriptions. From the CN1 side you can select to export boundaries and Guidance, but would not export the Prescriptions is using the ISO XML rate control. Click OK.

5. There is also an Advance Setup button. With options that can also be addressed. Click OK.

6. Insert a clean USB for the Pro700. Browse and double left click on the drive letter for the USB and click the Select Folder button.

7. Click OK at the WJ Data screen.

If you have tried these steps prior to posting, and still not working please let me know.

Thanks,

Kathy Cline,
Farm Works Software
SubjectAuthorPosted

Export to a Case Pro 700

blfarmApril 01, 2017 07:38AM

Re: Export to a Case Pro 700

KathyClineApril 03, 2017 06:01PM

Re: Export to a Case Pro 700

RogerCochranApril 05, 2017 08:28AM

Re: Export to a Case Pro 700

KathyClineApril 05, 2017 08:34AM

Re: Export to a Case Pro 700

RogerCochranApril 05, 2017 08:37AM

Re: Export to a Case Pro 700

KathyClineApril 06, 2017 08:16AM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited