News Office Field Order Support Contact Us

Importing FMX Yield Data

Search Discussion Boards
November 20, 2013 08:55PM
I have purchased the Trimble Yield monitor for the FMX1000 and used it this fall. The company that installed it had trouble getting it calibrated but when we finished corn and soybeans it was working and fairly close. Now i have taken the data out of the FMX1000 and put into Farm works (2013.09.557) i can get the elevation, gps quality, moisture, rate, region( if merging multiple days together) and speed to display. What i do not under stand how to get working is the rate is 0.00- 0.49 and that is red. I have a .50 to 1.88 that is yellow, 1.89 to 3.28 that is green, 3.29 to 4.28 that is teal, and a 4.69 to 99.79 that is purple. These are all under the legend portion. How does this get interpreted to yield? I know how to go in and make changes to the legend but how do I know what changes to make? or is this data worthless since something else did not get set up properly in the display? I also ran into the same problem with importing spray data as it was in a very small portion of OZ/ac when i want to see gallons/ac but i do not know how the oz/ac was figured as it was only showing 1.33oz/ac when i was putting on 15 gallons per ac or 1920 oz/ac. Also on the yield data is there a way to go into and make all of the fields that were combined before the monitor was working properly( it was recording just not accurate numbers) use the calibration that was used at the end? Any Help on this would be greatly appreciated.

Sam Bauder



Edited 1 time(s). Last edit at 11/20/2013 08:58PM by farmer319.
SubjectAuthorPosted

Importing FMX Yield Data

farmer319November 20, 2013 08:55PM

Re: Importing FMX Yield Data

KathyClineNovember 22, 2013 05:12PM

Re: Importing FMX Yield Data

farmer319November 24, 2013 09:25PM

Re: Importing FMX Yield Data

KathyClineNovember 25, 2013 08:50AM

Re: Importing FMX Yield Data

farmer319November 25, 2013 11:27AM

Re: Importing FMX Yield Data

KathyClineNovember 26, 2013 08:26AM

Re: Importing FMX Yield Data

farmer319December 01, 2013 09:25PM

Re: Importing FMX Yield Data

farmer319December 13, 2013 07:42AM

Re: Importing FMX Yield Data

KathyClineDecember 14, 2013 08:56AM

Re: Importing FMX Yield Data

farmer319December 14, 2013 12:14PM

Re: Importing FMX Yield Data

KathyClineDecember 16, 2013 11:26AM

Re: Importing FMX Yield Data

KathyClineDecember 02, 2013 10:12AM

Re: Importing FMX Yield Data

GonzoCSUDecember 04, 2013 12:35PM

Re: Importing FMX Yield Data

KathyClineDecember 04, 2013 04:10PM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited