OK, You can use the Autodraw feature from the yield data to create the field boundary.
Here are those steps to follow:
1. Display the yield map as top layer.
2. Right click on Field Name on left hand corner and select Edit boundaries.
3. Map tab will change to Map - Editing.
4. Click on the Autodraw button. Third button from right to left.
5. The yield layer name will fill in automatically.
6. Enter the header width for the Equipment width box.
7. If you do not have any sloughs or wet holes in the yield data you can leave the min box to zero. Click OK.
8. Once the map has been created, click the Save and close button.
Then we need to copy this new field map to the correct Crop/Year Enterprise so we can create the Grid-contour or Area View.
1. Right click on the new field boundary map and select Copy.
2. Back to Red Barn Tab, right click on the Crop Year Enterprise name for this field (may need to click the + button to left of field name to see the crop enterprise name). Select Edit Boundaries.
3. On Map - Editing screen, right click and select paste addition.
4. New map will display. Click Save and Close.
Now you are ready to start following the previous instructions.
Thanks,
Kathy Cline,
Farm Works Software
