News Office Field Order Support Contact Us

Re: Send a job to a Yuma2 or Windows Tablet

Search Discussion Boards
October 01, 2015 03:55PM
I am not certain how I missed this post, or if I did reply, where the post went. So Sorry that this was missed.

1. From FW Office display desired Field map (needing the Boundary layer as the top displayed layer - with Field Boundaries as the View and highlighting the field name under the Red Barn Tab, on the Mapping screen.
2. Right click on the Boundary map and select Make Sampling Grid.
3. Make sure the Planned job box is checked the points will already be checked and grayed out.
4. Select desired Size and Pattern for the Grid section.
5. From the Sample ID's section you can let the default Layer Data Item to Sample ID. Enter the correct Starting number and click OK.
6. When the Farming box appears for the Planned job, click OK.
7. Go to the Jobs tab. Right click on the Planned Soil Test job and select Workorder - Mobile
8. Complete the Mobile Synchronization. Which should update the TMSMData folder.
9. From Mobile make sure you have the correct Project selection - Config-Resources-Projects and click OK.
10. From the Jobs screen click on the Unfinished Jobs/ Workorder button.
11. Highlight the job for the soil Test and OK
12. When taken to the Mapping screen the sample points and navigation line should appear to follow.

Hope this helps.

Thanks,

Kathy Cline,
Farm Works Software
SubjectAuthorPosted

Send a job to a Yuma2 or Windows Tablet

Rodney SchmidtJuly 31, 2015 01:41PM

Re: Send a job to a Yuma2 or Windows Tablet

KathyClineOctober 01, 2015 03:55PM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited