News Office Field Order Support Contact Us

Re: Yuma 2 Won't Power up

Search Discussion Boards
July 27, 2015 01:18PM
Brad,

You can try this:

The Tablet Computer
fails to start up.

Perform these steps in the following order.

a. Remove the batteries. Both from the left (will display the serial number as well) and right sides.
b. Disconnect the external power source.
c. Re-install the batteries.
d. Connect the external power source
e. Try to reset.

If this does not help, then it would be best to call our Support line at 800-282-4103. The Technician answering the phone will need the serial number of the Yuma 2 unit. This can be found when screen is face down and the battery pack has been removed from the left side.

Thanks,

Kathy Cline,
Farm Works Software



Edited 1 time(s). Last edit at 07/27/2015 01:32PM by KathyCline.
SubjectAuthorPosted

Yuma 2 Won't Power up

Isaac FerrieJuly 27, 2015 12:54PM

Re: Yuma 2 Won't Power up

KathyClineJuly 27, 2015 01:18PM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited