News Office Field Order Support Contact Us

Re: Titan RT and external lightbar

Search Discussion Boards
September 30, 2013 11:49AM
The receiver is connected to com2 of the titan RT and the raven 660 controller is attached to Titan com3. This system works fine for variable rate control. I attempted to output GPS signal from com1 of Titan to lightbar using the afore mentioned cable which required a 9 pin female/female adapter to connect.

As far as settings, I have external lightbar checked comm port set as com1 and on-screen lightbar also checked.

Also in GPS settings / output I have the output NMEA box checked with com1, tried all different baud rates, 8 data bits, none parity and 1 stop bit. No check in the log raw data

Thanks
SubjectAuthorPosted

Titan RT and external lightbar

Dave BraggSeptember 30, 2013 09:26AM

Re: Titan RT and external lightbar

KathyClineSeptember 30, 2013 10:10AM

Re: Titan RT and external lightbar

Dave BraggSeptember 30, 2013 11:49AM

Re: Titan RT and external lightbar

KathyClineSeptember 30, 2013 02:09PM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited