News Office Field Order Support Contact Us

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

Search Discussion Boards
April 04, 2013 11:04AM
Still not working if you select this comport? If not, let's go back to the Device Manager and open the Com and LPT ports. Right click on the device name using the com 11 and select Properties. There should be a com button with crop down list. Change the comport to something available from 1 - 9 and OK. Continue to OK to close the Device Manager. Then open Mobile again and the Field-GPS settings. Change the comport selection on the Com tab to match what we changed in Device Manager. Make sure the Baud Rate is matching what receiver outputs and OK. Also make sure the Virtual GPS is disconnected from GPS as well. If still have issues, then it would be best to contact our Support Department at 800-282-4103 for further testing.

Thanks,

Kathy Cline,
Farm Works Software
SubjectAuthorPosted

Yuma 2 to Raven Pheonix 200 via serial to USB adapter

bviatorApril 03, 2013 01:08PM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

KathyClineApril 03, 2013 03:39PM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

bviatorApril 03, 2013 05:28PM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

Scott NusbaumApril 04, 2013 11:46AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

bviatorApril 05, 2013 09:12AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

KathyClineApril 05, 2013 12:23PM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

KathyClineApril 04, 2013 08:31AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

bviatorApril 04, 2013 08:36AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

KathyClineApril 04, 2013 11:04AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

bviatorApril 07, 2013 09:15AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

KathyClineApril 08, 2013 09:08AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

bviatorApril 08, 2013 07:40PM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

graeme@mountliming.co.ukAugust 04, 2014 08:32AM

Re: Yuma 2 to Raven Pheonix 200 via serial to USB adapter

KathyClineAugust 04, 2014 11:50AM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited