I am so sorry for the frustration. I am adding the settings for the AgRemote configuration. Please let me know if still needing further help.
Ag Remote Configuration:
1. Arrow to PORT A Config: 2. Arrow down to TSIP and change to RTCM 3. Arrow right and change to 9600 4. Arrow down to second line Set to 8N1 5. Arrow right to TSIP and change to NEMA 6. Arrow right and change to 9600 (recommended) or 4800. Hit Enter.
You will get a message stating connection has been lost. This is normal do not go back into the AgRemote or you wil lose all the changes you just made.
I am assuming you have the Serial Boot for the Nomad. This will provide the hookup for the 162 to the Nomad, using a Gender Changer adapter. When is SiteMate, go to the GPS Settings/Com Tab. Change comport to Com 1 and baud rate selected from step 6.