News Office Field Order Support Contact Us

Re: YUMA, Sitemate VRA, and Mid-Tech

Search Discussion Boards
September 22, 2009 03:18PM
Yes this can be done. You can have several controllers (VRT Setup) created in advanced within Site Mate on the Yuma. After making the needed cable connections, when using the the Sensor Job (log w/o control) or VRA Job button (when loading an RX map to control rates) you will be able to select the neccessay controller type from the other spreader truck hardware.

From Site Mate:

1. Go to the Config Tab (wrench).
2. Open the Logging button.
3. Open the Variable Rate Setup button.
4. Tap the New button.
5. Type the desired description. Select the appropriate Type and comport.
6. Go to the other Tabs and setup the needed information based upon the controller type selected.
7. From the Advance button, you can select to only log data when Boom or Spreader switch is on.

Hope this helps!

Thanks,

Kathy Cline,
Farm Works Software
SubjectAuthorPosted

YUMA, Sitemate VRA, and Mid-Tech

DanSeptember 22, 2009 10:18AM

Re: YUMA, Sitemate VRA, and Mid-Tech

KathyClineSeptember 22, 2009 11:10AM

Re: YUMA, Sitemate VRA, and Mid-Tech

DanSeptember 22, 2009 01:52PM

Re: YUMA, Sitemate VRA, and Mid-Tech

KathyClineSeptember 22, 2009 03:18PM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited