News Office Field Order Support Contact Us

Re: Old iPAC 3835

Search Discussion Boards
March 10, 2006 12:00AM
Keith, If you look at the back of the wiring harness on you spray controller most system have a wire that is connected to your master boom switch. They do that so If you want to move the master switch to the floor or closser to you you can. If you check some of your wires and look for a wire that gets power when the booms are off and when you turn the master switch off the power stops. It may be the other way too. This is the wire that we want to connect to our ifb box. If you have an older ifb box one with no wiring lable on the side you will hook it to the Red wire. If you have the newer ifb box then you will use the silver wire.

SubjectAuthorPosted

Old iPAC 3835

Keith Dunn March 09, 2006 12:00AM

Re: Old iPAC 3835

R. Scott Nusbaum - Farm Works Software March 10, 2006 12:00AM

Re: Old iPAC 3835

Jon March 10, 2006 12:00AM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited