News Office Field Order Support About Us

-1.00 with our as applied maps

Search Discussion Boards
March 01, 2001 12:00AM
We are using Site Mate VRA to control our Raven controller. When going from a 30 to 25 rate, the as applied rate stays at a -1.0, not a graduated rate. Is this something to do with the 1200 baud rate being too slow (as you stated in our earlier posting)? Also the actual applied rate bounces between -1.00 and the actual applied rate that the raven is sending back. We may get two points with good actual applied rate and then we will get one or two points with the actual applied rates of -1.00.

Also when we import the as applied information, it gives me the object id, RX rate, Rate, Swath width, speed, and heading. We are always getting speed at -999 and heading at -999. Are these numbers that just aren't get recorded for some hook up reason or just can't get recorded because of the low baud rate?


SubjectAuthorPosted

-1.00 with our as applied maps

Becky Newell March 01, 2001 12:00AM

-1.00 with our as applied maps

John Burns March 25, 2001 12:00AM

-1.00 with our as applied maps

R. Scott Nusbaum - Farm Works Software March 26, 2001 12:00AM

-1.00 with our as applied maps

R. Scott Nusbaum - Farm Works Software March 02, 2001 12:00AM

-1.00 with our as applied maps - still having problem

John Burns March 25, 2001 12:00AM

-1.00 with our as applied maps - still having problem

R. Scott Nusbaum - Farm Works Software March 26, 2001 12:00AM



Sorry, only registered users may post in this forum.

Click here to login

Privacy Statement | Terms of Use | Copyright 2009, Trimble Navigation Limited