I'm trying to use and AgGPS 162 with farmworks Moblie on my yuma2. I cannot get Moblie to receive the GPS signal from the 162. I have it connected with a usb adaptor from the 9pin serial cable. When the driver for the adaptor installed it stated COM port 15 was used. I change the GPS setting to com port 15 in Moblie, but it says GPS signal is not reach, but seems like it is connected otherwise. Am I missing a step somewhere to get the signal into Moblie. I see some info online about Agremote software being needed, but it doesn't say if it's needed or not for windows 7. If you can let me know how to get these 2 to communicate that would be great.